DAHL Shaft Earthing and Monitoring

Job Story: Upgrading Shaft Grounding Equipment 

Bluepoint Engineering LLC was contracted by Patriot Lines (via Bayonne Dry Dock) to overhaul the propulsion propeller earthing system on the USNS DAHL.

The mission? Replace a worn-out setup with a high-tech, dual-shaft earthing and real-time monitoring system to give the crew live electrical insights.

Vessel: USNS DAHL
Client: Patriot Lines / Bayonne Dry Dock
The Team: 2 Licensed Engineers + 1 Electrical Technician

Phase 1: Out with the Old

  • Stripped Down: Removed 2 worn slip rings and 4 grounding brushes.
  • Prepped: Deep-cleaned the shafts’ (Port and Stbd) surfaces to make room for the new hardware.

Phase 2: Custom Fabrication & Engineering

The new system came with extra hardware, requiring some quick-thinking engineering:

  • Bracket Welding: Fabricated and welded 2 brand-new custom brackets (one per shaft) to support the new monitoring brushes.
  • Precision Cutting: Custom-sized and cut heavy-duty copper slip rings right on site for a seamless, continuous track.
  • Secured: Fastened the rings tightly using manufacturer-spec metal bands and installed the new brushes.

Phase 3: Wiring & Tech Integration

Our Electrical Technician stepped in to bring the system to life:

  • Double Checked: Took continuity readings across multiple points to verify the hardware fit.
  • Bilge Wrangling: Navigated the bilge area to install mounting studs and route heavy cabling.
  • Panel Power: Mounted and wired the brand-new electrical monitoring panel.

Mission Accomplished

  • Tested: Wiring thoroughly verified.
  • Secured: All hardware locked down.
  • Result: The USNS DAHL sailed out with a fully modernized system, ready to deliver real-time data to her crew.

Related Job Stories

Phone System Foundation Fabrication & Installation

Bluepoint Engineering LLC was contracted by GBS Group under Customer PO #PO010509 to fabricate and install four custom equipment foundations...

SODERMAN CSW Spool Piece Emergent Repairs

Job Story: Emergency Marine Piping Replacement & ABS Certification Bluepoint Engineering LLC was contracted to attend the MV William A....

USCG Shinnecock Gear Repair

Job Story: Twin Disc Reduction Gear Overhaul & Testing Bluepoint Engineering LLC responded to US Coast Guard Station Shinnecock under...